Boiler Tube Expander
Tube Removal Tools
Tube Rolling Equipment
Boiler Tools Accessories
Vacuum Tube Leak Detector Kit
Tube to Tube Leak Detector
Tube/Pipe Beveling Equipment
Sugar Mill Tooling
Tube Expanders for Exchangers
Tube Installation Tools
Rolling Controls and Drives
Removal Tools
Spring Tool Balancers
Continuous Tube Pulling System
Flange Spreader
Tube Cleaning Brushes
Tube Expansion System
Hetran Bar Guide Pads & Acc.
Tube Cleaners
Contact Wheels
Bolting Tools
Impact Sockets / Power Sockets
Hydraulic Bolt Tensioners
Pneumatic Impact Hammers and Their Uses with Associated Tooling
Pneumatic Impact Hammers have many uses especially in the removal of tubes from a pressure vessel. If the tubes have been cut out and all you have left are the stub ends then using the collapsing tool with the impact hammer makes light work in removing the stub.

The chisel end of the collapsing tool is forced down inbetween the tube and the tube sheet. The centre groove on the collapsing chisel forces the tube to collapse inwardly therefore releasing pressure on the tube sheet and breaking the seal.

If the tube is thick walled then using the wall reducer will make the overall removal of the stub end much more easier.

Tubes which are flush with the outside of the tube sheet can also be removed with the Knockout/Drift tools. These fit inside the tube or stub end and force the tube back through the tube sheet.
Pneumatic Impact Tooling 
Collapsing Tools
Knockout / Drift Tools
Wall Reducing Tool