| Buffing Tools |
|
|
|
|
| Buffing Tools ¼" - 1" I.D. |
 |
| |
| Buffing Tools are used for final polishing or removal of light and soft deposits from ferrous and non-ferrous tubes that have been previously cleaned. Used in straight or very large radius tubes in a clockwise direction only. |
| |
| Tube I.D. |
Buffing Tool |
With Drill Tip |
Replacement Blades |
Adjusting Tool |
| inch |
mm |
| 5/16-3/8 |
7.9-9.5 |
PBT-1 |
PBT-1-T |
PBB-1 |
PBT-AT |
| 3/8-1/2 |
9.5-12.7 |
PBT-2 |
PBT-2-T |
PBB-2 |
PBT-AT |
| 1/2-9/16 |
12.7-14.3 |
PBT-3 |
PBT-3-T |
PBB-2 |
- |
| 5/8-1 |
15.9-25.4 |
PBT-4 |
PBT-4-T |
PBB-3 |
- |
|
| |
| |
| Buffing Tools 1" & UP I.D. |
|
| |
| Buffing Tools for Tubes/Pipes 1"-3" (25.4-76.2mm) I.D. |
| Buffing Tools are used for final polishing or removal of light and soft deposits from ferrous and non-ferrous tubes that have been previously cleaned. Used in straight or very large radius tubes in a clockwise direction only. |
 |
PBT-7 Buffing Tools for tubes 1”-3” (25.4-76.2mm) I.D. |
|
PBT-7-T Buffing Tools for tubes 1”-3” (25.4-76.2mm) with drill tip |
|
PBB-5 Replacement Blades for PBT-7 |
|
| |
 |
Boiler Tube Expander 
Tube Removal Tools 
Tube Rolling Equipment 
Boiler Tools Accessories 
Vacuum Tube Leak Detector Kit 
Tube to Tube Sheet Leak Detector 
Tube/Pipe Beveling Equipment 
Sugar Mill Tooling 
Tube Expanders for Heat Exchangers
Tube Installation Tools 
Rolling Controls and Drives 
Removal Tools 
Spring Tool Balancers 
Continuous Tube Pulling System 
Flange Spreader 
Tube Cleaning Brushes 
Tube Expansion System 
Hetran Bar Guide Pads & Accessories 
Tube Cleaners 
Contact Wheels 
Bolting Tools 
Impact Sockets / Power Sockets 
Hydraulic Bolt Tensioners 
